Products Overview


Processor Modules


I/O Expansion Modules


Systems


Enclosures & Accessories


Software


Custom Products

COM-based SBCs


2-in-1 SBCs


Custom Solutions


Ruggedization


Lifecycle Extension

Aerospace/Defense


Energy


Industrial Automation


Instrumentation


Medical


Transportation

Support Overview


Technical Resources


Contact Technical Support


Request an RMA

About Diamond Systems


The Diamond Advantage


Markets & Applications


News


Career Opportunities







3.5" Form Factor
PC/104
PC/104-Plus
PCIe/104
PCI/104-Express
COM Express
Single Board Computers
I/O Modules
Power Supplies
Single Board Computers
I/O Modules
Power Supplies
I/O Modules
Single Board Computers
Cables
PC/104
Adapters
PC/104
PC/104-Plus
PCIe MiniCard
PC/104
PCIe MiniCard
PC/104
PC/104-Plus
PCI/104-Express
PCIe MiniCard
PC/104-Plus
PCIe MiniCard
PC/104-Plus
PCIe MiniCard
I/O Modules
Single Board Computers
I/O Modules
PC/104
PC/104-Plus
PC/104
Small form factor
Ethernet Switch Modules
Single Board Computers
Ethernet Switches
Nano and NX Solutions
AGX Xavier Module Solutions
TX2 / TX2i Module Solutions
OPAL-MM-1616  16 Optoisolated Input & 16 Relay Output PC/104 Module
   PC104
 
Opal-MM-1616: I/O Expansion Modules, Wide-temperature PC/104, PC/104-<i>Plus</i>, PCIe/104 / OneBank, PCIe MiniCard, and FeaturePak modules featuring programmable bidirectional digital I/O, counter/timers, optoisolated inputs, and relay outputs., PC/104
FEATURES
16 unidirectional optoisolated digital inputs with 0-30VDC input
16 Form C SPDT relay outputs
2A relay switching capacity
Relays can switch both DC and AC voltages
Long lifetime relays
(10,000,000 operations)
500VDC isolation between board and signals
+5VDC power input
PC/104 form factor

Description

Opal-MM-1616 is a PC/104 format digital I/O module designed for industrial applications requiring isolation between the computer and the external signals it is monitoring and controlling.

The Opal-MM-1616 features 16 optoisolated digital inputs and 16 relay outputs. Each input has an input range of 0-30VDC. Opal-MM-1616 can be configured to generate an interrupt when any input changes state. Either or both banks of 8 inputs can be configured for interrupt operation. One 34-pin I/O header is used for the optoisolated inputs.
The 16 relay outputs are SPDT format (form C). Each relay has 3 contacts: Common, Normally Open, and Normally Closed. For safety and reliability, all relays are at their power-off state at power-up or system reset. Each relay can switch both AC and DC voltages. Two 26-pin I/O headers are used for the relay outputs with 8 relays on each pin header. The relays have long lifetime (10,000,000 operations) and quick actuation time (5ms max operate and release, break before make).
Diamond Systems' Universal Driver software provides drivers and example code for use with the Opal-MM-1616. The software provides support for interrupts and enables you to integrate you own code that is called when an interrupt occurs.

Opal-MM-1616: I/O Expansion Modules, Wide-temperature PC/104, PC/104-<i>Plus</i>, PCIe/104 / OneBank, PCIe MiniCard, and FeaturePak modules featuring programmable bidirectional digital I/O, counter/timers, optoisolated inputs, and relay outputs., PC/104

Signal Isolation

Opal-MM-1616 provides isolation on its input and output lines. The board will withstand up to 500V DC or AC difference in potential between the I/O lines and the rest of the board's circuitry. Each input and output channel on Opal-MM-1616 is completely independent and does not share any signal trace with any other channel. Therefore, every channel is isolated from every other channel.

I/O Headers

Opto-isolated Input Connector

In 0+ 1 2 In 0-
In 1+ 3 4 In 1-
In 2+ 5 6 In 2-
In 3+ 7 8 In 3-
In 4+ 9 10 In 4-
In 5+ 11 12 In 5-
In 6+ 13 14 In 6-
In 7+ 15 16 In 7-
In 8+ 17 18 In 8-
In 9+ 19 20 In 9-
In 10+ 21 22 In 10-
In 11+ 23 24 In 11-
In 12+ 25 26 In 12-
In 13+ 27 28 In 13-
In 14+ 29 30 In 14-
In 15+ 31 32 In 15-
NC 33 34 NC

Relay Output Connectors (2nd connector same as first for relays 8 - 15)

Relay 0 NO 1 2 Relay 0 C
Relay 0 NC 3 4 Relay 1 NO
Relay 1 C 5 6 Relay 1 NC
Relay 2 NO 7 8 Relay 2 C
Relay 2 NC 9 10 Relay 3 NO
Relay 3 C 11 12 Relay 3 NC
Relay 5 NO 13 14 Relay 4 C
Relay 4 NC 15 16 Relay 5 NO
Relay 5 C 17 18 Relay 5 NC
Relay 6 NO 19 20 Relay 6 C
Relay 6 NC 21 22 Relay 7 NO
Relay 7 C 23 24 Relay 7 NC
NC 25 26 NC

Specifications

Optoisolated Inputs
Number of inputs 16 unidirectional optoisolated inputs
Input capacity 30VDC with current limiting resistors
Input impedance 8k ohms
Logic levels Logic 0: 0 - 1.5VDC
Logic 1: 3 - 30VDC
Programmability Programmable edge detection with interrupts
Relay Outputs
Number of outputs 16 relay outputs
Relay contacts SPDT (Form C) contacts
Break before make
Current capacity 2A
Switching capacity 30VDC at 2A
125VAC at 0.1A resistive
Maximum switching capacity 30W (DC)
Contact resistance 50mohm max
Actuation time Operate: 5ms maximum
Release: 5ms maximum
Relay lifetime 10,000,000 operations
General
I/O header Optoisolated inputs: 1 34-pin (2 x 17) header on .1" connector
Relay outputs: 2 26-pin (2 x 13) headers on .1" connecters
Mating Cables: C-34-18 for optoisolated inputs
C-26-18 for relay outputs (quantity 2)
Isolation (all I/O) 500VDC or AC, input to board or board to output
Channel to channel isolation
Power supply +5VDC ±10%
Current consumption 70mA typical, all relays off; additional 28mA per activated relay
Bus interface PC/104 (ISA) bus
Form factor PC/104 (3.55" x 3.775")
Operating temperature -40°C to +85°C (-40°F to +185°F)
Weight 3.4oz (96g)
Universal Driver support
RoHS Compliant

Models and Accessories

 
Opal-MM-1616
available models:
OPMM-1616-XT
16 Optoisolated Input & 16 Relay Output PC/104 Module
Available
Please login or signup for an online quote request.
www.diamondsystems.com | Sunnyvale, California USA | +1-650-810-2500 |
sales@diamondsystems.com